| Part Number: CRH-1-AS-06 F595 | Manufacturer: Moog Inc | NSN: 5990-01-362-4011 (5990013624011) | |
| Alternate P/N : CRH1AS06F595 | Item Name : synchro receiver | CAGE Code: 99932 | FSC : 5990 Synchros and Resolvers |
We currently have Part Number CRH-1-AS-06 F595 with NSN 5990013624011 in stock. This component is manufactured by Moog Inc under CAGE Code 99932 and described as Synchro Receiver..
To get a quote , all you need to do is fill out the form for CRH-1-AS-06 F595 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number CRH-1-AS-06 F595 belongs to the Federal Supply Group 5990 Synchros And Resolvers.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-362-4011 Item Description: Synchro Receiver | 5990 | 013624011 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Crh-1-As-06 F595 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | ALUMINUM |
| AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.6540 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.8400 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| AJSL | BODY SIZE | 10 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 0.234 AMPERES NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 4.90 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 32.40 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 11.50 NOMINAL |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 5000.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJVW | ALIGNMENT HOLE QUANTITY | 3 |
| AJWH | SHAFT END PLAY | 0.0020 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0380 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.0620 NOMINAL INCHES |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES NOMINAL |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 19.40 NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| CTBP | SHAFT TIP LENGTH | 0.0200 INCHES MAXIMUM SINGLE SHAFT |
| CTJK | SHAFT FLATTED PORTION THICKNESS | 0.0830 INCHES MINIMUM SINGLE SHAFT AND 0.0870 INCHES MAXIMUM SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ERR-090 |
| AJSW | ZRO RESISTANCE IN OHMS | 18.20 NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 5400.0 MILLIMETER-MILLIGRAMS MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 2700.0 MILLIMETER-MILLIGRAMS MAXIMUM |
| CRSJ | SHAFT TYPE | ROUND, FLAT, UNDERCUT SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 0.997 WATTS FINISHED-CHAMFERED |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| CQTM | TERMINAL LOCATION | REAR |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 10.90 NOMINAL |
| CWFM | SHAFT FLATTED PORTION LENGTH | 0.1240 INCHES MINIMUM SINGLE SHAFT AND 0.1260 INCHES MAXIMUM SINGLE SHAFT |
| AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0380 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.3370 INCHES NOMINAL SINGLE SHAFT |
| AHCG | MAXIMUM TEMP RISE | 125.0 DEG CELSIUS |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.073 INCHES |
All Orders are Fulfilled in the USA.
All shipments must comply with USA export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote