| Part Number: TGH-11-H-7 | Manufacturer: Moog Inc | NSN: 5990-01-310-5421 (5990013105421) | |
| Alternate P/N : TGH11H7 | Item Name : synchro transmitter | CAGE Code: 99932 | FSC : 5990 Synchros and Resolvers |
We currently have Part Number TGH-11-H-7 with NSN 5990013105421 in stock. This component is manufactured by Moog Inc under CAGE Code 99932 and described as Synchro Transmitter..
To get a quote , all you need to do is fill out the form for TGH-11-H-7 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number TGH-11-H-7 belongs to the Federal Supply Group 5990 Synchros And Resolvers.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-310-5421 Item Description: Synchro Transmitter | 5990 | 013105421 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Tgh-11-H-7 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.1150 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 1.0610 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0450 INCHES MINIMUM AND 0.0550 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| AJSL | BODY SIZE | 11 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 900.0 ALLQJAA3.500 MICROWATTS |
| AJSW | ZRO RESISTANCE IN OHMS | 392.00 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 11.30 NOMINAL |
| AJTA | ZRS RESISTANCE IN OHMS | 556.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 230.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 5.300 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0/+7.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS MAXIMUM |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 4400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0005 INCHES |
| AJWH | SHAFT END PLAY | 0.0003 INCHES MINIMUM AND 0.0008 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2430.00 NOMINAL |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 50.30 NOMINAL |
| CRHN | SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.158 STATOR TO ROTOR NOMINAL |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TEST | TEST DATA DOCUMENT | 55973-5160113 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| AJWQ | PILOT LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| AJWR | SHOULDER LENGTH | 0.0590 NOMINAL MILS AND 0.0650 NOMINAL CENTIMETERS |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | 210.00 NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| AAQL | BODY STYLE | STANDARD ROUND C |
| ABXF | SHAFT LENGTH | 0.4850 INCHES MINIMUM SINGLE SHAFT AND 0.5150 INCHES MAXIMUM SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.9700 INCHES MINIMUM AND 0.9800 INCHES MAXIMUM |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 54.0 MILLIAMPERES MAXIMUM |
| AJTT | STATOR DC RESISTANCE IN OHMS | 9.70 NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6000 INCHES MAXIMUM |
| CQZS | SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM SINGLE SHAFT AND 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
All Orders are Fulfilled in the USA.
All shipments must comply with USA export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote