| Part Number: VTRX23-6G3 | Manufacturer: General Dynamics Global Imaging | NSN: 5990-01-114-5095 (5990011145095) | |
| Alternate P/N : VTRX236G3 | Item Name : synchro receiver tr | CAGE Code: 10112 | FSC : 5990 Synchros and Resolvers |
We currently have Part Number VTRX23-6G3 with NSN 5990011145095 in stock. This component is manufactured by General Dynamics Global Imaging under CAGE Code 10112 and described as Synchro Receiver Tr..
To get a quote , all you need to do is fill out the form for VTRX23-6G3 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number VTRX23-6G3 belongs to the Federal Supply Group 5990 Synchros And Resolvers.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-114-5095 Item Description: Synchro Receiver Tr | 5990 | 011145095 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Vtrx23-6g3 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL, CORROSION RESISTING |
| AAQL | BODY STYLE | STANDARD ROUND D |
| AAVH | SHOULDER DIAMETER | 1.9900 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.5950 INCHES NOMINAL |
| AAZW | SECOND SHOULDER DIAMETER | 1.9995 INCHES MAXIMUM |
| AAZX | SECOND SHOULDER LENGTH | 0.1700 NOMINAL INCHES |
| ABHP | OVERALL LENGTH | 4.2140 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 2.2500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.9900 NOMINAL CENTIMETERS |
| ABWV | SHAFT DIAMETER | 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.6760 INCHES NOMINAL SINGLE SHAFT |
| AEBZ | III SCHEMATIC DIAGRAM DESIGNATOR | 1 Y-ROTOR, 1 STATOR |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | END ITEM IDENTIFICATION | 05G0073-001 |
| AHCG | MAXIMUM TEMP RISE | 35.0 DEG CELSIUS |
| AJSL | BODY SIZE | 23 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 210.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 5.6 WATTS FINISHED-CHAMFERED |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 127.50 NOMINAL |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 13.50 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 95.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 106.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 11.000 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 160.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -8.0/+8.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0/+45.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.20 INCH-OUNCES NOMINAL |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.120 INCH-OUNCES MINIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0045 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0430 NOMINAL INCHES |
| AJWR | SHOULDER LENGTH | 0.1070 NOMINAL INCHES |
| AJWV | AFT OF FIRST FLANGE DIAMETER | 1.9995 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.5850 INCHES MAXIMUM |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 SINGLE SHAFT |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3000 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 16.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 SCREW |
All Orders are Fulfilled in the USA.
All shipments must comply with USA export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote