| Part Number: 531177 | Manufacturer: Fwd Seagrave Holdings Lp | NSN: 2520-00-805-1995 (2520008051995) |
| Item Name : shaft axle automoti | CAGE Code: 23382 | FSC : 2520 Vehicular Power Transmission Components |
We currently have Part Number 531177 with NSN 2520008051995 in stock. This component is manufactured by Fwd Seagrave Holdings Lp under CAGE Code 23382 and described as Shaft Axle Automoti..
To get a quote , all you need to do is fill out the form for 531177 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 531177 belongs to the Federal Supply Group 2520 Vehicular Power Transmission Components.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.656 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 53.630 INCHES NOMINAL |
| ABUJ | THREAD SIZE | 1/2 - 20 |
| AETC | METALLIC HARDNESS RATING | 42.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| AHTC | FLANGE OUTSIDE DIAMETER | 8.310 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| AMDM | FIRST END SPLINE LENGTH | 3.120 INCHES NOMINAL |
| AMDS | FIRST END PITCH DIAMETER | 2.250 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 3.120 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 2.250 INCHES NOMINAL |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 26 STUD AND 2 UNTHREADED HOLE |
| BBCD | FIRST END SPLINE QUANTITY | 18 |
| BBCF | SECOND END SPLINE QUANTITY | 18 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.680 INCHES NOMINAL |
| BNYX | FIRST END SPLINE TYPE | INVOLUTE |
| BNYY | FIRST END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| MATT | III MATERIAL | STEEL COMP 4340H |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BNYS | FLANGE OVERALL THICKNESS | 1.060 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE E4340H ASSN STD SINGLE MATERIAL RESPONSE |
All Orders are Fulfilled in the USA.
All shipments must comply with USA export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote