| Part Number: 70-223 | Manufacturer: Delta Intl Machinery Corp | NSN: 3413-01-369-3043 (3413013693043) | |
| Alternate P/N : 70223 | Item Name : drilling machine up | CAGE Code: 83738 | FSC : 3413 Drilling and Tapping Machines |
We currently have Part Number 70-223 with NSN 3413013693043 in stock. This component is manufactured by Delta Intl Machinery Corp under CAGE Code 83738 and described as Drilling Machine Up..
To get a quote , all you need to do is fill out the form for 70-223 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 70-223 belongs to the Federal Supply Group 3413 Drilling And Tapping Machines.
| MRC | Criteria | Characteristic |
|---|---|---|
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRL | SPINDLE TRAVEL DISTANCE | 6.000 INCHES NOMINAL |
| BNRW | BASE WORKING SURFACE LENGTH | 16.250 INCHES NOMINAL |
| BNRX | BASE WORKING SURFACE WIDTH | 13.500 INCHES NOMINAL |
| BNRZ | COLUMN TYPE | ROUND |
| BNSF | BASE WORKING SURFACE TYPE | TEE SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSH | BASE WORKING SURFACE AREA | 219.000 SQUARE INCHES |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | 44.500 INCHES |
| BNSP | UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| BNSQ | UPPER WORKING SURFACE AREA | 288.000 SQUARE INCHES |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSS | UPPER WORKING SURFACE LENGTH | 18.000 INCHES NOMINAL |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 34.250 INCHES NOMINAL |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 90.0 LEFT |
| ELEC | VOLTAGE IN VOLTS | 230.0 OR 460.0 |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | RAISING MECHANISM FOR HEAD OR TABLE 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,BELT GUARD 1,BELT AND MOTOR PULLEY (SPECIFY BORE) 1,SAFETY COLLAR FOR HEAD 1,MOTOR 1,CONTROLS 1 |
| FEAT | SPECIAL FEATURES | 24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND 3-LEG OVERLOAD PROTECTION (LVC),MEIGHT BALL BEARINGS REGIDLY SUPPORT SPINDLE ON SPEED REDUCTION MODELS. TEN-SPLINE SPINDLE IS 3/4 IN. IN DIAMETER FOR GREATER TORQUE TRANSMISSION. LARGE 2 3/8 IN. DIAMETER QUILL IS SUPPORTED BY THREE PRECISION BORED LANDS IN HEAD,PROVIDING EXTRA SMOOTH TRAVEL. LONG COLUMNS PROVIDE EXTRA BIG CAPACITY FOR LARGE WORK. |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | 34.250 INCHES |
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| AQDD | FEED TYPE | HAND |
| FAAZ | PHASE | THREE |
| BNRK | SPINDLE SOCKET TAPER SIZE | 3 MORSE |
| BNRY | DRILLING CAPABILITY | 1 IN. DRILLING CAPACITY IN MILD STEEL |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 11.875 INCHES NOMINAL |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| BNST | UPPER WORKING SURFACE WIDTH | 16.000 INCHES NOMINAL |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| AAXX | MOUNTING TYPE | FLOOR |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ACDC | CURRENT TYPE | AC |
| BQLR | SPINDLE TYPE | TAPERED SOCKET |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 125.0 TO 1400.0 |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| BCRH | SPINDLE QUANTITY | 1 |
| AJGD | HEAD TYPE | FIXED |
All Orders are Fulfilled in the USA.
All shipments must comply with USA export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote