We currently have Part Number AIC 1645-4-4C with NSN 5305-01-492-0203 in stock. This component is manufactured by Sps Technologies Ltd under CAGE Code 06725 and described as Screw Close Toleran.
To get a quote , all you need to do is fill out the form for AIC 1645-4-4C part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number AIC 1645-4-4C belongs to the Federal Supply Group [FSC].
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-492-0203 Item Description: Screw Close Toleran | 5305 | 014920203 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Aic 1645-4-4c | 5 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
AGAV | END ITEM IDENTIFICATION | ADV TECH BMBR |
CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
MATT | MATERIAL | PLASTIC TOP OF HEAD TITANIUM ALLOY UNS R56400 FASTENER |
ABQZ | INTERNAL DRIVE STYLE | TORX |
AAUJ | SPLINE MAJOR DIAMETER | 0.173 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AAJD | THREAD CLASS | 3A |
AASA | THREAD LENGTH | 0.425 INCHES NOMINAL |
AASB | FASTENER LENGTH | 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
AASL | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
ANEE | GRIP LENGTH | 0.250 INCHES NOMINAL |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 09A196-2,CAGE1W025 MFR REF SINGLE MATERIAL RESPONSE TOP OF HEAD |
THSD | THREAD SERIES DESIGNATOR | UNJF |
CMLP | THREAD QUANTITY PER INCH | 28 |
Guaranteed on-time |
|
Customized and |
|
Over 5100 |
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote