We currently have Part Number PB200-1 7-8 with NSN 3130-00-824-5181 in stock. This component is manufactured by Safeguard Powertech Systems under CAGE Code 84659 and described as Bearing Unit Ball.
To get a quote , all you need to do is fill out the form for PB200-1 7-8 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number PB200-1 7-8 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-824-5181 Item Description: Bearing Unit Ball | 3130 | 008245181 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Pb200-1 7-8 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.6250 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 1.0625 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.8750 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 5.8125 INCHES MINIMUM AND 6.6875 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 4.3125 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 7.8750 INCHES NOMINAL |
| AGNF | BASE LENGTH | 2.1250 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.3438 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON MALLEABLE HOUSING |
| ACYB | BASE THICKNESS | 0.7500 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.1875 INCHES NOMINAL |
| MATT | MATERIAL | RUBBER SEAL AND STEEL SEAL |
| MATT | MATERIAL | STEEL BEARING SURFACE |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK, SOLID |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
