We currently have Part Number 484 002 C91 with NSN 3130-01-009-7002 in stock. This component is manufactured by Navistar Intl Corp under CAGE Code 92679 and described as Bearing Unit Ball.
To get a quote , all you need to do is fill out the form for 484 002 C91 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 484 002 C91 belongs to the Federal Supply Group [FSC].
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3130-01-009-7002 Item Description: Bearing Unit Ball | 3130 | 010097002 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
484 002 C91 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
ABTD | MOUNTING SLOT WIDTH | 0.5000 INCHES NOMINAL |
ABVG | MOUNTING SLOT LENGTH | 0.5625 INCHES NOMINAL |
ABXV | BORE DIAMETER | 40.00 MILLIMETERS NOMINAL |
ACYB | BASE THICKNESS | 0.2000 INCHES NOMINAL |
ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.6250 INCHES NOMINAL |
AFWC | HOUSING HEIGHT | 5.5000 INCHES NOMINAL |
AFWD | HOUSING LENGTH | 2.0000 INCHES NOMINAL |
AFWE | HOUSING WIDTH | 7.7500 INCHES NOMINAL |
AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
AGNF | BASE LENGTH | 2.0000 INCHES NOMINAL |
AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
AHZC | ASSEMBLY OVERALL LENGTH | 2.0000 INCHES NOMINAL |
AKRF | SEAL TYPE | CONTACT |
AMCL | BLOCK TYPE | FIXED |
ANJS | SHAFT END TYPE | OPEN |
ANKF | SEAL LOCATION | BOTH ENDS |
ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.4375 INCHES NOMINAL |
CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
CWJW | MOUNTING HOLE TYPE | SLOTTED |
FEAT | SPECIAL FEATURES | ARMOR GUARD SEALS |
LBMA | LUBRICATION MATERIAL | GREASE |
MATT | MATERIAL | RUBBER INNER LINER |
MATT | MATERIAL | RUBBER SEAL |
MATT | MATERIAL | STEEL COMP E52100 BEARING |
MATT | MATERIAL | STEEL HOUSING |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
STYL | STYLE DESIGNATOR | PILLOW BLOCK, SEPARABLE WITH INNERLINER |
Guaranteed on-time |
|
Customized and |
|
Over 5100 |
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote