We currently have Part Number TSH11F08B431 with NSN 5990-00-553-5923 in stock. This component is manufactured by Moog Inc under CAGE Code 99932 and described as Resolver Electrical.
To get a quote , all you need to do is fill out the form for TSH11F08B431 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number TSH11F08B431 belongs to the Federal Supply Group [FSC].
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5990-00-553-5923 Item Description: Resolver Electrical | 5990 | 005535923 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Tsh11f08b431 | 2 | 2 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | STEEL, STAINLESS |
AAQL | BODY STYLE | STANDARD ROUND C |
AAVH | SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
AAVL | PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 2.1600 INCHES MINIMUM AND 2.1840 INCHES MAXIMUM |
ABKK | FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM |
ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
ABWV | SHAFT DIAMETER | 0.1195 INCHES MINIMUM SINGLE SHAFT AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
ABXF | SHAFT LENGTH | 0.4260 INCHES MINIMUM SINGLE SHAFT AND 0.4500 INCHES MAXIMUM SINGLE SHAFT |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AJSL | BODY SIZE | 11 |
AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
AJST | ROTOR INPUT CURRENT RATING | 20.0 MILLIAMPERES NOMINAL |
AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 80.0 ALLQJAA3.500 FINISHED-CHAMFERED |
AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | 1580.00 NOMINAL |
AJTH | ZRO IMPEDANCE ANGLE IN DEG | 78.50 NOMINAL |
AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | 1300.00 NOMINAL |
AJTK | ZSO IMPEDANCE ANGLE IN DEG | 78.00 NOMINAL |
AJTW | TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.4 NOMINAL |
AJVF | PHASE SHIFT ANGLE IN DEG | 7.000 INPUT TO OUTPUT NOMINAL |
AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 29.00 OUTPUT |
AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 46.00 |
AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0/+10.0 |
AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.0 CENTIMETER-GRAMS NOMINAL |
AJWQ | PILOT LENGTH | 0.0620 NOMINAL INCHES |
AJWR | SHOULDER LENGTH | 0.0620 NOMINAL INCHES |
AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7960 INCHES NOMINAL |
CQTM | TERMINAL LOCATION | REAR |
CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
CSJY | TRANSFORMATION RATIO | 0.846 STATOR TO ROTOR NOMINAL |
TTQY | TERMINAL TYPE AND QUANTITY | 7 WIRE LEAD |
Guaranteed on-time |
|
Customized and |
|
Over 5100 |
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote