We currently have Part Number ETH10BPS4 with NSN 5990-01-017-9861 in stock. This component is manufactured by Moog Inc under CAGE Code 99932 and described as Synchro Control Tra.
To get a quote , all you need to do is fill out the form for ETH10BPS4 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number ETH10BPS4 belongs to the Federal Supply Group [FSC].
MRC | Criteria | Characteristic |
---|---|---|
ABWV | SHAFT DIAMETER | 0.8950 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
CQTM | TERMINAL LOCATION | REAR |
TTQY | TERMINAL TYPE AND QUANTITY | 5 TURRET |
CRSJ | SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
AJSP | STATOR INPUT CURRENT RATING | 21.0 MILLIAMPERES NOMINAL |
AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
AJSW | ZRO RESISTANCE IN OHMS | 800.00 NOMINAL |
AJTS | ROTOR DC RESISTANCE IN OHMS | 560.00 NOMINAL |
AJVF | PHASE SHIFT ANGLE IN DEG | 9.000 INPUT TO OUTPUT NOMINAL |
CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 2.2235 INCHES NOMINAL |
AAQL | BODY STYLE | STANDARD ROUND C |
AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
ABKK | FLANGE DIAMETER | 0.9360 INCHES MINIMUM AND 0.9370 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
AJSL | BODY SIZE | 10 |
AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 50.0 MILLIWATTS NOMINAL |
AJSY | ZSO RESISTANCE IN OHMS | 115.00 NOMINAL |
AJTT | STATOR DC RESISTANCE IN OHMS | 100.00 NOMINAL |
AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS MAXIMUM |
AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
CQXQ | PLUS J ZRO REACTANCE IN OHMS | 2900.00 NOMINAL |
CRGZ | PLUS J ZSO REACTANCE IN OHMS | 470.00 NOMINAL |
CRSY | ALIGNMENT HOLE DEPTH | 0.0500 INCHES NOMINAL |
ABKU | FLANGE THICKNESS | 0.0630 INCHES NOMINAL |
AJVW | ALIGNMENT HOLE QUANTITY | 3 |
AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.8370 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
ABXF | SHAFT LENGTH | 0.8125 INCHES NOMINAL SINGLE SHAFT |
Guaranteed on-time |
|
Customized and |
|
Over 5100 |
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote