We currently have Part Number B51-8089-01 with NSN 3040-00-027-4944 in stock. This component is manufactured by Illinois Tool Works Inc under CAGE Code 5G804 and described as Gearshaft Bevel.
To get a quote , all you need to do is fill out the form for B51-8089-01 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number B51-8089-01 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-027-4944 Item Description: Gearshaft Bevel | 3040 | 000274944 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B51-8089-01 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 4.000 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 4.000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 44 |
| AJWS | GEAR OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | PLAIN |
| AQGH | DIAMETRAL PITCH | 31 |
| AQPL | FACE WIDTH | 0.150 INCHES NOMINAL |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | 10.0000 DEGREES AND 30.0000 DEGREES |
| CWQD | PITCH ANGLE | 90.0000 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL COMP 440C OR STEEL COMP 440F |
| CYER | GEAR MATERIAL | COPPER ALLOY |
| CYET | SHAFT LARGEST DIAMETER | 0.399 INCHES MINIMUM AND 0.401 INCHES MAXIMUM |
| CYEU | GEAR LOCATION ON SHAFT | ON END OF SHAFT |
| CYEW | SHAFT END SIZE | 0.188 INCHES |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
