We currently have Part Number HC-10-4A with NSN 5340-01-259-0502 in stock. This component is manufactured by Hydro Craft Inc under CAGE Code 23619 and described as Clamp Block.
To get a quote , all you need to do is fill out the form for HC-10-4A part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number HC-10-4A belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-259-0502 Item Description: Clamp Block | 5340 | 012590502 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Hc-10-4a | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.500 INCHES MINIMUM AND 5.780 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.915 INCHES MINIMUM AND 1.045 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 1.400 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 3 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.500 INCHES NOMINAL |
| AXPE | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 3.000 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.670 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| CWTD | CLAMPING HOLE QUANTITY | 4 |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 1.280 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.580 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| CWYS | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | 4.500 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/2 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY2,CL1 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
