We currently have Part Number 555-009 with NSN 5315-01-469-5404 in stock. This component is manufactured by General Dynamics Satcom Technologies under CAGE Code 0F6V7 and described as Pin Grooved Headles.
To get a quote , all you need to do is fill out the form for 555-009 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 555-009 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-469-5404 Item Description: Pin Grooved Headles | 5315 | 014695404 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 555-009 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRDY | FIRST END LOCATION | GROOVED END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| FEAT | SPECIAL FEATURES | HEAT TREAT TO H1100 CONDITION PRIOR TO MACHINING |
| AMCS | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.998 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | CHAMFERED |
| MATT | MATERIAL | STEEL COMP 630 OVERALL |
| AGAV | END ITEM IDENTIFICATION | 5895-01-379-0125 |
| ABPA | UNDERCUT DIAMETER | 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | GROOVE |
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 2.120 INCHES NOMINAL |
| ABNZ | EFFECTIVE LENGTH | 1.700 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.130 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
