We currently have Part Number TDX37-6H4 with NSN 5990-01-311-3710 in stock. This component is manufactured by General Dynamics Global Imaging under CAGE Code 10112 and described as Synchro Differentia.
To get a quote , all you need to do is fill out the form for TDX37-6H4 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number TDX37-6H4 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-311-3710 Item Description: Synchro Differentia | 5990 | 013113710 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Tdx37-6h4 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | ALUMINUM |
| AAQL | BODY STYLE | STANDARD ROUND DOUBLE FLANGE A |
| AAVH | SHOULDER DIAMETER | 3.3340 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 1.6300 INCHES MAXIMUM |
| AAZW | SECOND SHOULDER DIAMETER | 3.3700 INCHES NOMINAL |
| AAZX | SECOND SHOULDER LENGTH | 0.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 6.0500 INCHES MAXIMUM |
| ABKK | FLANGE DIAMETER | 3.6230 INCHES MINIMUM AND 3.6250 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2498 INCHES MINIMUM SINGLE SHAFT AND 0.2500 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.7700 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGRS | DISTANCE BETWEEN FLANGES | 1.8120 INCHES NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 4.25 WATTS MAXIMUM |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 14.60 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 10.50 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0/+18.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.300 INCH-OUNCES MINIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 5 |
| AJWH | SHAFT END PLAY | 0.0010 INCHES MINIMUM AND 0.0050 INCHES MAXIMUM |
| AJWQ | PILOT LENGTH | 0.0200 INCHES MINIMUM AND 0.0400 INCHES MAXIMUM |
| AJWW | AFT OF SECOND FLANGE DIAMETER | 3.3750 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.7680 INCHES NOMINAL |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.3020 INCHES MINIMUM SINGLE SHAFT AND 0.3220 INCHES MAXIMUM SINGLE SHAFT |
| CRSJ | SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 1.000 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 3.0000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 48.0 OUNCES |
| FEAT | SPECIAL FEATURES | SHAFT IS ALSO SLOTTED,0.032 IN. WIDE BY 0.047 IN. DEEP |
| ABPM | BODY DIAMETER | 3.3900 INCHES MAXIMUM |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0010 INCHES |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SCREW |
| AJSS | FREQUENCY IN HERTZ | 50.0 MINIMUM AND 60.0 MAXIMUM |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.50 INCH-OUNCES MAXIMUM |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 48.0 OUNCES |
| ABKU | FLANGE THICKNESS | 0.2460 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AJSL | BODY SIZE | 37 |
| AJSP | STATOR INPUT CURRENT RATING | 550.0 MILLIAMPERES MAXIMUM |
| AJWE | SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.7850 INCHES NOMINAL |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.5000 INCHES NOMINAL |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
