Buy 00D676CLASS8 of Federal Specifications with NSN 3413-00-540-5421 - Quote Now!

Part Number:  00D676CLASS8
Alternate P/N:  00D676CLASS8
Manufacturer:  federal specifications
Item Name :  drilling machine up
CAGE Code:  81348

We currently have Part Number 00D676CLASS8 with NSN 3413-00-540-5421 in stock. This component is manufactured by Federal Specifications under CAGE Code 81348 and described as Drilling Machine Up.

To get a quote , all you need to do is fill out the form for 00D676CLASS8 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 00D676CLASS8

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.

With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.

A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 00D676CLASS8 belongs to the Federal Supply Group [FSC].

Characteristics Data of NSN 3413-00-540-5421, 3413005405421

MRCCriteriaCharacteristic
BTSZSPINDLE SPEED QUANTITY4
BTTBSPINDLE SPEED RANGE IN RPM2450.000 TO 6000.000
SR-1SPEC/STD CONTROLLING DATA
AJGDHEAD TYPEFIXED
BNQLMAIN DRIVE TYPEELECTRIC MOTOR
BNRLSPINDLE TRAVEL DISTANCE2.000 INCHES NOMINAL
BNRWBASE WORKING SURFACE LENGTHANY ACCEPTABLE
BNSDDISTANCE FROM SPINDLE CENTER TO COLUMN3.000 INCHES NOMINAL
BNSFBASE WORKING SURFACE TYPEPLAIN W/COOLANT TROUGH
FAAZPHASESINGLE
BNSLBASE WORKING SURFACE MOUNTING LOCATIONBASE
BNSMMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE8.000 INCHES
BNSNUPPER WORKING SURFACE TYPEPLAIN
BNSPUPPER WORKING SURFACE SHAPERECTANGULAR
BNSQUPPER WORKING SURFACE AREAANY ACCEPTABLE
AKSQFUNGUS RESISTANT TREATMENTNOT INCLUDED
BNSTUPPER WORKING SURFACE WIDTH8.000 INCHES NOMINAL
BNSWUPPER WORKING SURFACE ADJUSTMENT FEATUREINCLUDED
BNSZTILT ADJUSTMENT DIRECTION AND ANGLE IN DEG90.0 LEFT 90.0 RIGHT
ACDCCURRENT TYPEAC
ZZZTNONDEFINITIVE SPEC/STD DATAB CLASS
ELECVOLTAGE IN VOLTS110.000
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE00D676CLASS8
BWJNUPPER WORKING SURFACE MOUNTING LOCATIONOVER LOWER ROUND TABLE
BWJPMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE7.500 INCHES
ALYEROTATION REVERSIBILITY FEATURENOT INCLUDED
AQDDFEED TYPEHAND
SR-1MANUFACTURERS CODE81348
BNRYDRILLING CAPABILITY1/4 IN MILD STEEL
BNRZCOLUMN TYPEROUND
BNSCDRILL CHUCK SIZE ACCOMMODATED1/4 IN. KEY
BNSGBASE WORKING SURFACE SHAPEROUND
BNSHBASE WORKING SURFACE AREAANY ACCEPTABLE
BNSJBASE WORKING SURFACE DIAMETER5.500 INCHES NOMINAL
BNSKBASE WORKING SURFACE VERTICAL ADJUSTMENT8.000 INCHES NOMINAL
BNSSUPPER WORKING SURFACE LENGTH6.000 INCHES NOMINAL
BNSXUPPER WORKING SURFACE VERTICAL ADJUSTMENT8.000 INCHES NOMINAL
BNSYSWIVEL ADJUSTMENT IN DEG90.000
AAXXMOUNTING TYPEBENCH
BQLRSPINDLE TYPESOLID MALE TAPERED FOR DRILL CHUCK
ALBHRADIO INTERFERENCE SHIELDINGNOT PROVIDED
BCRHSPINDLE QUANTITY1
FREQFREQUENCY IN HERTZ60.000

Why Choose Us

Guaranteed on-time
Delivery

Customized and
User-friendly Database

Over 5100
Manufacturers

Complete Purchasing
Solutions

We are proud to supply every branch of the United States military

ASAP Semiconductor’s Certifications And Memberships



Thank You for Visiting.

We Hope You Remember Us the Next Time You are Looking for NSN Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top