We currently have Part Number 375-05-05 ITEM 10 with NSN 5315-01-295-8806 in stock. This component is manufactured by Ederer Inc under CAGE Code 63952 and described as Pin Shoulder Headle.
To get a quote , all you need to do is fill out the form for 375-05-05 ITEM 10 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 375-05-05 ITEM 10 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-295-8806 Item Description: Pin Shoulder Headle | 5315 | 012958806 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 375-05-05 Item 10 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| AAHP | SECOND END STYLE | CHAMFERED AND COUNTERBORED |
| AASA | THREAD LENGTH | 0.750 INCHES NOMINAL |
| AATR | SHANK LENGTH | 0.750 INCHES NOMINAL |
| AAVH | SHOULDER DIAMETER | 2.3745 INCHES MINIMUM AND 2.3750 INCHES MAXIMUM |
| AAZE | SHANK DIAMETER | 2.352 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 6.562 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.125 INCHES NOMINAL |
| ABRB | HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| ABRC | FIRST HOLE DIAMETER | 0.344 INCHES NOMINAL |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 3.375 INCHES NOMINAL |
| AMFM | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDY | FIRST END LOCATION | THREADED END |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHOULDER OUTSIDE DIAMETER |
| CTHC | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DRILL 0.344 IN. NOMINAL DIAMETER 3.562 INCH NOMINAL DEPTH LONGITUDINAL HOLE IN SHOULDER END,ON AXIAL CENTER INTERSECTING 0.344 INCH NOMINAL DIAMETER PERPENDICULAR HOLE,TAP WITH 0.125 NATIONAL PIPE THREAD; TWO SYMMETRICAL GROOVES PARALLEL TO |
| STYL | STYLE DESIGNATOR | UNDERCUT |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
