We currently have Part Number E32-110 with NSN 3020-00-834-7036 in stock. This component is manufactured by Designatronics Inc under CAGE Code 00328 and described as Gear Spur.
To get a quote , all you need to do is fill out the form for E32-110 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number E32-110 belongs to the Federal Supply Group [FSC].
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 1.5270 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 110 |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 TRANSVERSELY THROUGH HUB, FIRST END |
| CQFM | III HARDNESS RATING | 75.0 ROCKWELL C MINIMUM AND 83.0 ROCKWELL C MAXIMUM OVERALL |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.556 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 0.406 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.375 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.187 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 0.375 INCHES FIRST END |
| MATT | III MATERIAL | STEEL COMP 303 AND STEEL COMP 303SE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COMP 303S MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND MIL-S-7720,COMP 303SE MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.112 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN FIRST END |
| STYL | STYLE DESIGNATOR | PROTRUDING HUB |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
