We currently have Part Number Q1001-4-09 with NSN 3110-00-058-1663 in stock. This component is manufactured by Curtiss Wright Controls Inc under CAGE Code 00288 and described as Bearing Ball Rod En.
To get a quote , all you need to do is fill out the form for Q1001-4-09 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number Q1001-4-09 belongs to the Federal Supply Group [FSC].
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3110-00-058-1663 Item Description: Bearing Ball Rod En | 3110 | 000581663 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Q1001-4-09 | 6 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
AAZF | SHANK STYLE | EXTERNALLY THREADED |
ABHP | OVERALL LENGTH | 2.3440 INCHES NOMINAL |
ABXV | BORE DIAMETER | 0.2500 INCHES NOMINAL |
ADGA | OVERALL OUTSIDE DIAMETER | 0.9380 INCHES NOMINAL |
ADZG | LUBRICATION MATERIAL | GREASE |
AGGY | SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL |
AGVT | OUTER RING WIDTH | 0.4375 INCHES NOMINAL |
AGVU | INNER RING WIDTH | 0.5930 INCHES NOMINAL |
AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8750 INCHES NOMINAL |
AGYJ | SEAL QUANTITY | 2 |
AGYW | BEARING SEAL TYPE | CONTACT |
AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
CMLP | THREAD QUANTITY PER INCH | 24 |
CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
FEAT | SPECIAL FEATURES | 0.980 IN. W 0.670 IN. DEEP @KEYWAY PER NAS 513,FILL 40 TO 50 PCT WITH SPECIFIED LUBRICANT |
LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
MATT | MATERIAL | STEEL BALL |
MATT | MATERIAL | STEEL INNER RING |
MATT | MATERIAL | STEEL OUTER RING |
MATT | MATERIAL | STEEL SHAFT |
SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
STYL | STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
THSD | THREAD SERIES DESIGNATOR | UNF |
Guaranteed on-time |
|
Customized and |
|
Over 5100 |
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote