We currently have Part Number TIP00284-22MAY70 with NSN 3220-00-287-8797 in stock. This component is manufactured by Cecom Lr Center under CAGE Code 97403 and described as Saw Circular Table.
To get a quote , all you need to do is fill out the form for TIP00284-22MAY70 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number TIP00284-22MAY70 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3220-00-287-8797 Item Description: SAW,CIRCULAR,TABLE TYPE | 3220 | 002878797 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TIP00284-22MAY70 | 3 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ACZB | FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | BLADE,CIRCULAR SAW,WOODCUTTING,COMBINATION,1,BLADE CIRCULAR SAW WOODCUTTING,CROSSCUT,1,BLADE,CIRCULAR SAW,WOODCUTTING,MITER,1,BLADE,CIRCULAR SAW,WOODCUTTING,RIP,1,DADO HEAD,2.000 IN. MIN W,1 |
| AMSE | VOLTAGE RATING | 230.0 VOLTS MINIMUM AND 460.0 VOLTS MAXIMUM |
| ANCY | HORSEPOWER RATING | 5.000 |
| APQB | UNIT TYPE | TILTING ARBOR |
| AQDD | FEED TYPE | HAND |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| ARDQ | TABLE LENGTH | 40.000 INCHES NOMINAL |
| ARDR | TABLE WIDTH | 36.000 INCHES NOMINAL |
| BNBB | TABLE TYPE | NONTILTING |
| BPTM | BLADE MAXIMUM DIAMETER ACCOMMODATED | 16.000 INCHES |
| BTYL | ARBOR TYPE | SINGLE |
| BXJP | SAW ARBOR DIAMETER ACCOMMODATED | 1.000 INCHES MINIMUM |
| BXJR | ARBOR TILT ANGLE IN DEG | 45.0 |
| FAAZ | PHASE | THREE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | I TYPE AND 16 SIZE |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
