We currently have Part Number M01075REVH with NSN 6105-00-349-6896 in stock. This component is manufactured by Bae Systems Information And Electronic Systems Integration Inc under CAGE Code 80249 and described as Motor Control.
To get a quote , all you need to do is fill out the form for M01075REVH part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number M01075REVH belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-349-6896 Item Description: Motor Control | 6105 | 003496896 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M01075revh | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CONTROL | AAJT | OVERALL HEIGHT2 875 INCHES |
| CONTROL | AAJU | OVERALL LENGTH4 562 INCHES |
| CONTROL | AAJV | OVERALL WIDTH2 375 INCHES |
| CONTROL | AASA | THREAD LENGTH0 120 INCHES NOMINAL FIRST END |
| CONTROL | ABND | TAPER LENGTH0 179 INCHES MINIMUM FIRST END AND 0 189 INCHES MAXIMUM FIRST END |
| CONTROL | ABPA | UNDERCUT DIAMETER0 075 INCHES NOMINAL FIRST END |
| CONTROL | ABWV | SHAFT DIAMETER0 112 INCHES NOMINAL FIRST END |
| CONTROL | ABXQ | FLATTED PORTION LENGTH0 7500 INCHES NOMINAL SECOND END |
| CONTROL | ACDC | CURRENT TYPEAC INPUT |
| CONTROL | AGQL | UNDERCUT LENGTH0 030 INCHES NOMINAL FIRST END |
| CONTROL | AGRB | FLAT DEPTH0 016 INCHES MINIMUM SECOND END AND 0 017 INCHES MAXIMUM SECOND END |
| CONTROL | ANPZ | INCLOSURE FEATURETOTALLY INCLOSED |
| CONTROL | AXGY | MOUNTING METHODPAD |
| CONTROL | AXHR | MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE |
| CONTROL | BFMF | COOLING METHODNATURAL CONVECTION VENTILATED |
| CONTROL | BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS4900 0 AND 5100 0 |
| CONTROL | BFML | CONTROL FIELD WINDING TYPESINGLE WINDING WCENTER TAP |
| CONTROL | BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE0 130 INCHES MINIMUM AND 0 140 INCHES MAXIMUM FIRST END |
| CONTROL | BKPH | TORQUE RATING AND TYPE5 0 INCH-OUNCES STALLED |
| CONTROL | BKPQ | INCLOSURE SPECIFICATIONCOMMERCIAL |
| CONTROL | BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS300 0 AC |
| CONTROL | CBBL | FEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CONTROL | CQJX | NOMINAL THREAD SIZE0 112 INCHES FIRST END |
| CONTROL | CQRR | TAPER8 000 PER FOOT IN INCHES FIRST END |
| CONTROL | CWCS | LENGTH OF SHAFT FROM HOUSING0 375 INCHES FIRST END |
| CONTROL | CWDY | TEMP RATING-29 0 AMBIENT DEG CELSIUS AND 65 0 AMBIENT DEG CELSIUS |
| CONTROL | CWFX | ROTOR SPEED RATING IN RPM3300 0 SINGLE NO LOAD |
| CONTROL | CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1 920 INCHES |
| CONTROL | CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1 500 INCHES |
| CONTROL | CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS115 0 LINE TO NEUTRAL SINGLE INPUT |
| CONTROL | CWHZ | SHAFT END CHARACTERISTICA2 FIRST STYLE AND A4 SECOND STYLE AND A28 THIRD STYLE FIRST END |
| CONTROL | FAAZ | PHASETWO INPUT |
| CONTROL | FEAT | SPECIAL FEATURESSHAFT END SECOND STYLE 0 157 IN DIA SHAFT END THIRD STYLE 0 112 IN DIA |
| CONTROL | FREQ | FREQUENCY IN HERTZ60 0 INPUT |
| CONTROL | THSD | THREAD SERIES DESIGNATORUNF FIRST END |
| CONTROL | TTQY | TERMINAL TYPE AND QUANTITY5 SCREW |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
