We currently have Part Number 08SM1019 with NSN 6105-00-045-7930 in stock. This component is manufactured by Ametek Technical And Industrial under CAGE Code 14404 and described as Motor Control.
To get a quote , all you need to do is fill out the form for 08SM1019 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 08SM1019 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-045-7930 Item Description: Motor Control | 6105 | 000457930 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 08sm1019 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 0.750 INCHES |
| AAJU | III OVERALL LENGTH | 1.375 INCHES |
| AAJV | OVERALL WIDTH | 0.750 INCHES |
| ABWV | SHAFT DIAMETER | 0.1242 INCHES MINIMUM SINGLE END AND 0.1247 INCHES MAXIMUM SINGLE END |
| ACDC | CURRENT TYPE | AC INPUT |
| AJLA | TEETH QUANTITY | 13 SINGLE END |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMJ | CONTROL FIELD CURRENT RATING IN AMPS | 0.110 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED |
| BFMS | FULL TOOTH LENGTH | 0.300 INCHES MINIMUM SINGLE END |
| BKPB | CURRENT RATING METHOD | NO LOAD |
| BKPH | TORQUE RATING AND TYPE | 0.24 INCH-OUNCES STALLED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 26.0 AC |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.410 INCHES SINGLE END |
| CWDY | TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 125.0 OPERATING DEG CELSIUS |
| CWFX | ROTOR SPEED RATING IN RPM | 6200.0 SINGLE NO LOAD |
| CWGL | CURRENT RATING IN AMPS | 0.110 SINGLE INPUT |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 26.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A17 SINGLE STYLE SINGLE END |
| FAAZ | PHASE | TWO INPUT |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
