We currently have Part Number AB1162B with NSN 5990-00-716-1820 in stock. This component is manufactured by Ametek Inc under CAGE Code 61349 and described as Synchro Receiver.
To get a quote , all you need to do is fill out the form for AB1162B part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number AB1162B belongs to the Federal Supply Group [FSC].
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5990-00-716-1820 Item Description: Synchro Receiver | 5990 | 007161820 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Ab1162b | C | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAFZ | BODY MATERIAL | STEEL, STAINLESS |
AAQL | BODY STYLE | STANDARD ROUND C |
AAVH | SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
ABHP | OVERALL LENGTH | 1.6160 INCHES NOMINAL |
ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 0.3750 INCHES NOMINAL SINGLE SHAFT |
AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
AJSL | BODY SIZE | 10 |
AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
AJST | ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 430.0 MILLIWATTS NOMINAL |
AJVF | PHASE SHIFT ANGLE IN DEG | 6.500 INPUT TO OUTPUT NOMINAL |
AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -30.0/+30.0 |
AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.3 CENTIMETER-GRAMS NOMINAL |
AJVV | TORQUE GRADIENT PER ANGULAR DEG | 2000.0 MILLIMETER-MILLIGRAMS NOMINAL |
AJVW | ALIGNMENT HOLE QUANTITY | 3 |
AJWQ | PILOT LENGTH | 0.0380 INCHES NOMINAL |
AJWR | SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2410 INCHES MAXIMUM |
CQTM | TERMINAL LOCATION | REAR |
CQXQ | PLUS J ZRO REACTANCE IN OHMS | 285.00 NOMINAL |
CRSJ | SHAFT TYPE | ROUND SINGLE SHAFT |
CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
AAVL | PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
ABKK | FLANGE DIAMETER | 0.9300 INCHES MINIMUM AND 0.9340 INCHES MAXIMUM |
ABPA | UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
ABWV | SHAFT DIAMETER | 0.0895 INCHES MINIMUM SINGLE SHAFT AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
AJSW | ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
AJTS | ROTOR DC RESISTANCE IN OHMS | 33.00 NOMINAL |
AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.6 CENTIMETER-GRAMS NOMINAL |
CRSY | ALIGNMENT HOLE DEPTH | 0.0620 INCHES MAXIMUM |
Guaranteed on-time |
|
Customized and |
|
Over 5100 |
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote