We currently have Part Number K24137P4 with NSN 3010-00-055-1215 in stock. This component is manufactured by Ai Tek Instruments Llc under CAGE Code 1XP56 and described as Gearcase Motor.
To get a quote , all you need to do is fill out the form for K24137P4 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number K24137P4 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3010-00-055-1215 Item Description: Gearcase Motor | 3010 | 000551215 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| K24137p4 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 2.438 INCHES |
| AAJU | III OVERALL LENGTH | 1.914 INCHES |
| AAJV | OVERALL WIDTH | 2.125 INCHES |
| ABWV | SHAFT DIAMETER | 0.1240 INCHES MINIMUM SINGLE END AND 0.1260 INCHES MAXIMUM SINGLE END |
| ACDC | CURRENT TYPE | AC INPUT |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | OFFSET ABOVE PARALLEL TO SHAFT AXIS SINGLE END |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPH | TORQUE RATING AND TYPE | 0.025 INCH-OUNCES RUNNING AND 0.025 INCH-OUNCES STARTING |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.445 INCHES SINGLE END |
| CWDY | TEMP RATING | -54.0 OPERATING DEG CELSIUS AND 71.0 OPERATING DEG CELSIUS |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.875 INCHES |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | 5.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| CWHZ | SHAFT END CHARACTERISTIC | A1 SINGLE STYLE SINGLE END |
| FAAZ | PHASE | SINGLE INPUT |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
