We currently have Part Number 0160-0624 with NSN 5910-01-010-2910 in stock. This component is manufactured by Agilent Technologies Inc under CAGE Code 1MY97 and described as Capacitor Fixed Ceramic Dielectric.
To get a quote , all you need to do is fill out the form for 0160-0624 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 0160-0624 belongs to the Federal Supply Group [FSC].
| MRC | Criteria | Characteristic |
|---|---|---|
| AEBT | TERMINAL DIAMETER | 0.016 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.300 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHEDNOT ESTABLISHEDNOT ESTABLISHED |
| ADAQ | BODY LENGTH | 0.300 INCHES MAXIMUM |
| CQJJ | NONDERATED OPERATING TEMP | 55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQLZ | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| CRHD | TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | 30.0/+30.0 SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -5.00/+5.00 PERCENT SINGLE SECTION |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 2500.0 MEGOHM-MICROFARADS |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| AAQL | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACEW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| ABJT | TERMINAL LENGTH | 1.500 INCHES MINIMUM1.500 INCHES MINIMUM1.500 INCHES MINIMUM |
| ADAU | BODY HEIGHT | 0.100 INCHES MAXIMUM |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.200 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 30.0 DC SINGLE SECTION |
| CWJK | CASE MATERIAL | PLASTIC |
| CWQF | QUALITY FACTOR AT REFERENCE TEMP | 1000 |
| CQBQ | CAPACITANCE VALUE PER SECTION | 56.000 PICOFARADS SINGLE SECTION |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
