We currently have Part Number 968-1D902 with NSN 6105-00-101-7746 in stock. This component is manufactured by Advanced Logic Resources Inc under CAGE Code 07CR8 and described as Motor Alternating C.
To get a quote , all you need to do is fill out the form for 968-1D902 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 968-1D902 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 6105-00-101-7746 Item Description: Motor Alternating C | 6105 | 001017746 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 968-1d902 | C | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJT | OVERALL HEIGHT | 1.062 INCHES |
| AAJU | III OVERALL LENGTH | 1.897 INCHES |
| AAJV | OVERALL WIDTH | 1.062 INCHES |
| AAUH | SPLINE MINOR DIAMETER | 0.1083 INCHES NOMINAL SINGLE END |
| ABSA | SPLINE QUANTITY | 13 SINGLE END |
| ABWV | SHAFT DIAMETER | 0.1247 INCHES NOMINAL SINGLE END |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE SINGLE END |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | INCLOSURE FEATURE | TOTALLY INCLOSED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXFH | SPLINE LENGTH | 0.3130 INCHES NOMINAL SINGLE END |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR AND 4 THREADED HOLE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPH | TORQUE RATING AND TYPE | 0.4 INCH-OUNCES RUNNING |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | 0.313 INCHES SINGLE END |
| CWDY | TEMP RATING | -54.0 OPERATING DEG CELSIUS AND 165.0 OPERATING DEG CELSIUS |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | 0.812 INCHES |
| CWFX | ROTOR SPEED RATING IN RPM | 8000.0 SINGLE FULL LOAD |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| CWHZ | SHAFT END CHARACTERISTIC | A14 SINGLE STYLE SINGLE END |
| FAAZ | PHASE | TWO INPUT |
| FREQ | FREQUENCY IN HERTZ | 400.0 INPUT |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
