We currently have Part Number LT50041-1 with NSN 5315-01-316-7734 in stock. This component is manufactured by Advanced Ground Systems Engineering under CAGE Code 9M323 and described as Pin Grooved Headles.
To get a quote , all you need to do is fill out the form for LT50041-1 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/customer-terms-and-conditions/. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number LT50041-1 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5315-01-316-7734 Item Description: Pin Grooved Headles | 5315 | 013167734 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Lt50041-1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGZ | FIRST END STYLE | CHAMFERED |
| ABHP | OVERALL LENGTH | 2.380 INCHES NOMINAL |
| ABNZ | EFFECTIVE LENGTH | 2.030 INCHES MINIMUM AND 2.040 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.441 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| ABPD | SECOND UNDERCUT WIDTH | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | LANTIRN TARGETING POD |
| AMCS | FIRST END TAPER LENGTH | 0.050 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | GROOVE |
| ABPC | UNDERCUT WIDTH | 0.039 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| ABMZ | DIAMETER | 0.479 INCHES MINIMUM AND 0.486 INCHES MAXIMUM |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
