We currently have Part Number 198-24-71PC30 with NSN 3020-01-031-9386 in stock. This component is manufactured by Circor Intl Inc under CAGE Code 16626 and described as Gear Bevel.
To get a quote , all you need to do is fill out the form for 198-24-71PC30 part provided below. Make sure that you fill in all the necessary details, this will help us provide the quote that meets your needs. Once you submit the form, one of our experienced representatives will get back to you with a quote in 15 minutes or less.
Note : We Will Not Share Your Information To Any Third Parties.
This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor's Terms & Conditions available athttps://www.asapsemi.com/terms-conditions.aspx. All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without CAGE code 6RE77 is void.
With over 100 million parts sold, we are among the reputed independent distributors within the United States. Sourcingstreamlined.com has over 26 different distinct federal supply code categories, with more than 10 million national stock numbers from 5,000 leading manufacturers.
A national stock number, also known as an NSN, part bears an official label indicating its procurement, storage, and stocking within the Federal supply system. NSN parts are an essential part of the military and defense logistics supply chain and can have multiple part numbers under it depending on whether it has multiple manufacturers for the same part. Part number 198-24-71PC30 belongs to the Federal Supply Group [FSC].
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-031-9386 Item Description: Gear Bevel | 3020 | 010319386 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 198-24-71pc30 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | PLAIN, SOLID |
| AGJS | PITCH DIAMETER | 1.5000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 18 |
| ANTP | BORE STYLE | W/ KEYWAY BOTH ENDS |
| CWCD | NOMINAL OUTSIDE DIAMETER | 1.688 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.125 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 35.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.656 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.406 INCHES |
| CWRS | BORE NOMINAL DIAMETER | 0.625 INCHES BOTH ENDS |
| CWSN | KEYWAY NOMINAL WIDTH | 0.188 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.406 INCHES BOTH ENDS |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| CWTX | HUB NOMINAL DIAMETER | 1.125 INCHES SECOND END |
| MATT | III MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING |
|
Guaranteed on-time |
|
|
Customized and |
|
|
Over 5100 |
|
|
Complete Purchasing |
We Hope You Remember Us the Next Time You are Looking for NSN Parts.
Request for Quote
